Disassembly Guide; Precautions - Airvom PLASMA W201 Guía De Usuario

Before disassembling the product, make sure that the power plug is unplugged.
nd
Tip: To increase stability during disassembly, proceed with the product on a wall or on other fixed object.
en
er
<Front panel / Filter disassembly / Filter assembly>
1.Hold the top with your left hand, the top edge of the front panel with your right hand, pull the panel at a 45 degree angle,
and then lift the panel. / Disassemble the composite filter by gently pulling the two handles on both sides
2. Raise the filter towards the outer edge, then gently push it into the body. / Insert the lower hook into the front cover hole,
and then assemble the front panel close to the body.
on
3. The life of the filter is approximately 1,500 hours and may vary depending on the indoor environment, usage time and
ou
location of use. To improve the efficiency of the filter, purchase a filter sold by us.
ct
4. Before replacing with a new filter, be sure to turn off the power of the machine and then replace it.
5. For the life of the filter, remove large particles such as hair with a soft brush once every two weeks.
a-
ou
p,
ed
at
by
• Do not let the charging cable be crushed by heavy objects or bent excessively, and keep away from pets.
nt
- It may cause product failure, injury or electric shock.
• Do not connect and unplug the power plug consecutively.
- It may cause electric shock, fire or product failure.
• Do not connect or plug random cables or altered power cords.
- It may cause electric shock, fire or product failure.
• Do not allow any particles to enter the charging terminal.
- It may cause electric shock, fire or product failure.
• Do not leave the product in a hot and humid environment such as a sauna, in a place where water splashes, or is humid, such as
under a blanket, swimming pool, or bathrooms.
- It may cause deformation, malfunction or explosion of the product.
• Avoid direct contact with the product during water splashing.
- It may cause electric shock, fire or product failure.
• During severe thunder and lightning, do not use the product outdoors, and disconnect the power cord and charger from the product.
- It may cause electric shock, fire or product failure.
• Do not operate the product while driving, walking or moving.
-There is a risk of injury or safety issue.
• Do not install on an uneven or inclined place, or on a pallet, cushion or floor.
- It cause malfunction and noise, and may cause injury. Check the product status from time to time.

Disassembly Guide

Precautions

Potentially dangerous situations that, if not avoided,
WARNING
could result in death or serious injury
5