Adjusting The Volume; Changing The Hearing Program; Further Adjustments (Optional) - Miracle-Ear GENIUS 3.0 Manual De Usuario

Removing a hearing aid:
Lift the hearing aid
X
and slide it over the top of
your ear .
If your hearing aid is
X
equipped with a custom shell
or a Click Mold, remove it
by pulling the small removal
cord toward the back of your
head.
For all other ear pieces: Grip the receiver in the
ear canal with two fingers and pull it carefully out
Do not pull the receiver cable.
CAUTION
Risk of injury!
In very rare cases the ear piece could remain
X
in your ear when removing the hearing aid. If
this happens, have the ear piece removed by a
medical professional.
Clean and dry your hearing aids after usage. Read more
in section "Maintenance and care".

Adjusting the volume

Your hearing aids automatically adjust the volume to the
listening situation.
If you prefer manual volume adjustment, press the
X
push button.
16
Refer to section "Controls" for the setting of your
push button.
An optional signal can indicate the volume change.
Once the maximum or minimum volume has been
reached, you may hear an optional signal tone.

Changing the hearing program

Depending on the listening situation, your hearing aids
automatically adjust their sound.
Your hearing aids may also have several hearing
.
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the
program change.
To change the hearing program, press the
X
push button briefly.
Refer to section "Controls" for the setting of your
controls. Refer to section "Hearing programs" for a list
of your hearing programs.
The default volume is applied.

Further adjustments (optional)

The controls of your hearing aids can also be used to
change, for example, the tinnitus therapy
signal level.
Refer to section "Controls" for the setting of your
controls.
17