ORIENT STAR RA-AC0L01B Manual De Instrucciones página 8

 HAND WINDING MECHANISM
(1) The mainspring is wound up manually.
(2) To wind the spring, ensure that the crown is in its normal position and
slowly turn it clockwise.
Turning the crown counterclockwise will have no effect.
(3) When the watch is in the stopped state, the spring can be wound
sufficiently by rotating the crown approximately 30 times. Since the crown
will rotate even when winding is complete, wind the watch using the
above number of turns as a guide.
(4) This watch will run approximately 40 hours after the spring is fully wound.
 SCREWED-DOWN CROWN
The crown can be locked (fixed) by screwing it into the case. Locking the
crown can prevent accidental operations and improve the watch's waterproof
performance.
Operate this type of watch as follows:
(1) Before setting the date and time, first turn the crown counterclockwise to
loosen the screw lock.
(2) After setting the date and time, turn the crown clockwise while pressing
in, until it stops turning to securely tighten the screw.
8