Total Tools Carbone TS42142101 Manual Del Usuario página 6

• Connect the saw to a dust collection device and ensure
that it is operated properly. As the operator of the saw,
please make sure that you understand factors that
influence exposure to dust, including the type of material
to be machined, the importance of local extraction and
the proper adjustment of hoods/baffles/shoots of your
dust extraction system. We recommend that you always
wear a dust mask when operating this saw.
• Wear gloves when handling saw blades and rough
materials.
• Saw blades shall be carried in a holder wherever possible.
• Select saw blades in relation to the material being cut.
• Usecorrectly sharpened saw blades and observe the
maximum speed marked on the blade.
• Takeadditional care when trenching (slotting).
• The mitre saw can be safely carried by the carrying
handle but only once it has been removed from the
mains power and secured in the locked down position.
• Ensure that the arm is properly secure when bevelling.
• Keep th oor area around the machine level, well
maintained and free of loose materials.
• Ensure that you are trained in the use, adjustment and
operation of the machine.
• Do not remove any cut-offs from the cutting area until
the guard is fully locked in placed and the blade has
come to rest.
• When cutting long pieces which extend well over the
table width, ensure that the ends are adequately
supported at the same height as the saw table top.
Supports should be positioned in such a way to
ensure that the workpiece does not fall to the ground
once the cut has been made. A number of supports at
regular intervals may be required if the workpiece is
extremely long.
Wear goggles
Wear earmuffs
Wear a breathing mask
Description of symbol s
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Double insulated for
additional protection.
Specifications:
Model No.:
Rated power input:
Rated voltage:
No-load speed:
Blade diameter:
Max cutting capacity:
Model No.:
Rated power input:
Rated voltage:
No-load speed:
Blade diameter:
Max cutting capacity:
Accessories
1pcs dust bag
1pcs hex key
5
TS42142101
1400W
220-240V~50/60Hz
5000/min
210mm
55x120mm
UTS42142101