MAINTENANCE SCHEDULE
The following schedules should be followed for normal care of your rider and mower.
RIDER MAINTENANCE, All Models
Clean Debris from Rider and Engine Compartment *
Clean Debris from Engine Cooling Areas & Air Filter *
Check Tire Pressure
Lubricate Rider & Mower *
Clean Deck & Check/Replace Mower Blades
Clean Battery & Cables
Check Rider Safety System **
Check / Adjust PTO Clutch
ENGINE MAINTENANCE,
26HP Kohler
Check Engine Oil Level *
Replace Air Filter *
Change Oil & Filter *
Remove Shroud, Clean Cooling Fins *
Replace Fuel Filter †
Check & Re-Gap / Replace Spark Plug
Service Starter Drive, Check & Adjust Valve
Clearance †
* More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
† These services should be performed by Sears or other qualified service dealer.
MAINTENANCE
Before
Each Use
•
•
8 Hours
25 Hours or
or Daily
2 Months
•
•
21
Spring
8
25
& Fall
Hours
Hours
•
•
•
•
100 Hours
200 Hours
or Annually
or 2 Years
•
•
•
100
200
Yearly
Hours
Hours
•
•
•
•
200
500
Hours
Hours
•
•
•