Publicidad
Idiomas disponibles
Idiomas disponibles
Performance:
bacterial filtration efficiency (BFE) ≥98%, breathability <40 Pa / cm2, UFC / g≤ 30. Mask
compliant with UNI EN 14683: 2019 and ISO 10993-1: 2018. Non sterile surgical mask
Description Packaging-Presentation of the article to the user:
The mask is supplied to the user in a package with 30 spare filters which, together with
the instructions for use, can be in a vacuum-sealed PP / PE bag with an identification
label with the information required by legislation or in a single labeled cardboard box
containing the heat-sealed bag with the mask, the filters and instructions for use.
Replacement filters can also be placed on the market separately from the surgical
mask in packs containing 30 filters.
Method of assembly and use:
• Wash and sanitize your hands before assembling and putting on the mask.
• To assemble the mask: place the filter material on the cap of the mask, making sure
4
it covers the entire internal surface of the
cap. Then assemble the mask, inserting
the cap with the filter into the support face
mask making sure that the two parts are
completely locked together.
• Put on the mask taking care to position
it properly on the face and use the
drawstring in order to position the mask
so that it adheres as closely as possible
to the face. When wearing the mask, be
careful not to touch the body of the mask
itself.
• Do not wear the mask hanging around
your neck, even temporarily.
• The SMS filter is disposable to be used
for one work shift only.
The
face
mask
•
compound is reusable after washing up to
a maximum of 35.
• It is recommended to put the mask in a
clean bag when not in use.
• At the end of the work shift, remove the
filter from the mask and dispose of it.
• To remove the filter, press lightly on
one side of the filter until the joint is
disengaged, remove the used filter and
dispose of it. Wash your hands thoroughly
after touching the filter.
• The mask must be washed and dried
before being used again.
Washing instructions:
• Wash by hand or in the washing machine
on a delicate program using a neutral
detergent.
• Once dry, you can put the new filter back
on and then reposition the cap by pressing
lightly, until each side fits together. Carry
out this operation with sanitized hands in
order to avoid dirtying the mask.
in
thermoplastic
Publicidad
