CG Drives & Automation 01-5464-00 Manual Del Usuario página 8

Remove the front cover
First open and remove the front cover on the AC-drive in following order.
1. Loosen the two screws A (see Fig. 4) at the bottom of the cover a couple of
turns (you do not have to remove the screws).
2. Swing out the lower part of the cover a bit and remove the cover downwards.
Be careful, don't swing out the cover too much as this could damage the
"lips" at the upper hinges.
A
Fig. 4 Remove the front cover (principle drawing).
6
CG Drives & Automation 01-5912-11r0