Publicidad
Idiomas disponibles
Idiomas disponibles
Carbon HD HP diving hoses for gauges
! WARNING: Read, understand and follow all war-
nings and instructions provided with your hoses.
Failure to do so could result in an accident, loss of
air, personal injury or death.
print them and keep them in a safe place for future reference. If you
sell or give away your hoses, please give these instructions to the new
owner.
2. Hoses which have been replaced should never be used again. They
should immediately be cut into several pieces and discarded.
3. Always consult the user manual(s) that accompanied any device to
which your hose will be connected.
4. If your hose shows any sign of damage or wear, no matter how slight,
immediately replace the hose. A damaged or worn hose can fail sud-
denly and without warning, resulting in a loss of air. Always carry spare
hoses with you.
5. Never dive unless you have successfully completed a training course
6. Never expose your hose to any heat source.
7. Never allow your hose to be crushed.
8. Never allow sand, water or any other foreign object to enter your
hose.
9. Never use aggressive cleaning agents on your hose. Use only mild
soap and warm water
10. The hose is designed to use air or nitrogen/oxygen mixtures con-
taining up to 40% oxygen. Use of gas mixtures with increased oxygen
or the addition of other substances may cause corrosion, deterioration,
premature aging or failure of the hose.
11. Always select the hose of the correct strength, construction and size
for your particular use. If you ever have any questions, doubt or concern
local dive store and/or service centre.
Fitting your hoses
1. Fitting hoses requires specialized knowledge, tools and experience.
Publicidad
