Using The Buttons; Turning The Burner On; Adjusting Flame Level; Turn The Burner Off - ENJOYABLE WARMTH SMART BIO SF Serie Manual Del Usuario

Owner's manual SF-xxx-x series bio-ethanol burner

3.2. Using the buttons

The buttons on the burner can be used to operate the burner.
Remote
control sensor
Down
Up
On/off

3.2.1. Turning the burner on

To turn on the burner, push the on/off button twice (you will hear a beep
each time you press a button).
Note: it may take up to 5 minutes for the burner to warm up. During this
warm-up time, no yellow flames will be visible.

3.2.2. Adjusting flame level

Adjust the flame level by pressing the Up or Down buttons (there are 5
levels). It may take a minute before the difference in level is visible.

3.2.3. Turn the burner off

Push the on/off button to turn the burner off. A beep will sound and the
power button will flash green. This indicates the cooling down period has
started, which as a safety measure will last approximately 10 minutes,
during which time you cannot start the burner again.
Page 17 / 181 Version 1.3