Vinylexpress Q Serie Guía De Usuario página 237

13.2
Desktop Contour-Cut Marks Option
Operation
The Contour Cut Mark feature is intended for use with desktop printers for which a printer driver is installed
in Windows. Create registration marks for printing and cutting.
1
Create rectangles on the design screen using "Rectangle" tool.
2 Select the rectangles and select "Effects" - "Rectangle to Contour Cut Mark".
Select a type of registration mark on the "DesignCentral" screen. For best results, choose Graphtec
3
4-Point Type 1 or Graphtec 4-Point Type 2 (See pg 13-4). This will place a mark at each corner of the
design.
Press the "Options" button.
4
Here, you may specify the length and thickness of the registration mark on the displayed "Graphtec Mark
Options" screen.
Press "OK".
5 Press the on the "DesignCentral" screen. Registration marks are created on the design screen.
13-4