Yamaha CLICKSTATION Manual Del Usuario página 13

Nomenclature
CD player, etc.
Both standard
phone and mini
jacks can be used
simultaneously.
■ Attaching the Holder
Attaching the supplied tilt angle lets you set the
CLICKSTATION at an angle on top of a desk, etc.,
for use.
Wing Bolt (supplied)
Tilt Angle (supplied)
■ Front Panel
q Display
w Beat Volume
e Vibration Volume (VIB.)
r Volume (VOL.)
t Vibrator (VIBRATION)
y Speaker
u Beat Indicators
i Control Buttons
o Start/Stop Switch (also used as Tap Switch)
!0 Tempo Dial (TEMPO)
!1 Back Light Switch
(auto off or continuous operation available,
refer to page 18)
DTX pad, etc.
Refer to the "Attach-
ing the Holder" section
described below.
Also, the CLICKSTATION can be attached to a
mic stand, cymbal stand, cowbell holder, etc.,
using the optional mount adaptor or mic stand
adaptor.
■ Side Panel
!2 Headphones Jacks x2 (PHONES)
!3 Power Switch (POWER ON/OFF)
!4 MIDI IN jack (MIDI IN)
■ Rear Panel
!5 External Device Input Jack (AUX IN)
!6 Trigger Input Jack (TRIGGER IN)
!7 Holder Attachment
!8 Power Adaptor Jack (DC IN 9V)
AC adaptor (optional)
MIDI device
13