How To Use The Appliance - JUICEME TD-1000 Manual De Instrucciones

EN

HOW TO USE THE APPLIANCE

Connect drum with main body by turning
locking clip clockwise (about 60Degree).
Place hopper onto guide.
For juicing function:
Place the screw into the drum. Insert
the juicing strainer into the drum.
Place the drum cap onto the drum
end and turn it counter-clockwise
until it clicks firmly into place.
Attach pulp ejection cover to the drum
end cap.
For mincing function:
Place the screw into the drum. Insert
the mincing strainer into the drum.
Place the drum cap onto the drum
end and turn it counter-clockwise
until it clicks firmly into place.
If interested in making pasta, u-dong,
please process to page 9.
Place juice container and pulp container
under drum set. Plug the power cord into
a wall socket and push it tight.
Press the ON button, Place a few piece
of cut fruits or vegetables, one at a time
into the guide. Use the pusher to press
the fruits or vegetables gently down the
guide. Leave the machine on as you
feed in the fruits / vegetables.
OPEN CLOSE
07
HOW TO USE THE APPLIANCE
DO NOT place any metal objects into
the hopper. If the drum set is plugged
or the machine stops operating, press
the REV button 2 to 3 minutes and
press the ON button again to resume
normal operation.
Switch the juicer OFF before changing
accessories or touching any moving
parts. Remove the drum set from the
main body by turning the locking clip
counter-clockwise. Pull the screw forward
to disassemble if from the drum set.
After juicing, wash all parts in warm soapy
water. DO NOT wash any of the juicer
accessories in the dishwasher or a dish
dryer.
DO NOT operate the appliance for more
than 30 minutes at a time..
As it may cause a motor failure due to
over heating. After 30 minutes use, turn
off the appliance and allow it to cool down
for about 5 minutes then operate it again.
08