Publicidad
Idiomas disponibles
Idiomas disponibles
Sublimation process
IMPORTANT: The process explained below can vary depending on the quality of the material and its
manufacturers.
1.
Print the design on sublimation paper.
2.
Attach the printed design with thermal tape to the mug.
3.
Turn ON the heat press to adjust temperature and time.
4.
Wait until the heat press reaches the correct temperature.
5.
Place the mug on the heat press.
6.
Use the handle to close carefully the heating press.
Press the ■ button (square) to start the countdown. Wait until countdown finishes and the press
7.
turns the time alarm on.
Press the ■ button (square) to turn off the countdown alarm.
8.
9.
Use the handle to open the heating plate and remove the mug from the heat press.
10. Remove the excess material to finish the process.
21
Publicidad
