Bell'O Digital BDSW-1650-BLK Manual Del Usuario página 6

WIRING
1. Plug the Wireless Adapter into the wireless Subwoofer connection port on Bell'O Digital sound system.
Adhere one side of the hook/loop adhesive to the adapter as shown. With the opposite side attached,
peel off the adhesive strip and adhere to the inside of the shelf as shown.
1
2. For the main unit (Subwoofer)
Connect one end of the AC Power to the back of the Subwoofer and the other end to an AC wall outlet.
2
SUBWOOFER
INPUT
PAIR
DC 24V IN
3. Press the Power Switch on the back panel of the Subwoofer to ON.
4. The Subwoofer will automatically PAIR.
5. If there is a need to connect again, the user may also PAIR the Subwoofer manually.
a. Press and hold the PAIR button on the wireless adapter for 3 seconds. The green indicator light will
begin blinking.
b.Press and hold the PAIR button on the Subwoofer for 3 seconds. The green indicator light will
begin blinking.
c.The Subwoofer will PAIR again.
3
SUBWOOFER
INPUT
PAIR
BDSW-1650-BLK REV.0
DC 24V IN
VOLUME
SUBWOOFER
INPUT
PAIR
ON
OFF
DC 24V IN
VOLUME
ON
OFF
VOLUME
SUBWOOFER
INPUT
PAIR
PAIR
ON
VOLUME
OFF
DC 24V IN
ON
www.tsicustomerservice.com
OFF
PAIR
PAIR
PAIR
6