Instalación - HPWINNER Alluminia T20A Serie Manual Del Usuario

DIMENSIONES
MODELO ANCHO
T20A-1 670 mm
T20A-2 670 mm
T20A-3 750 mm
T20A-4 830 mm
T20A-5 910 mm
PAQUETE
760 mm
T20A-1
760 mm
T20A-2
840 mm
T20A-3
920 mm
T20A-4
1000 mm
T20A-5
INSTALACIÓN
1. Open 2 latches, loosen 4 screws
on the mounting bracket.
4. Adjust the lamp to required
mounting position, fasten 4 screws
on the mounting bracket with wrench.
LARGO GROSOR PESO
325 mm 180 mm 8.0 Kg
325 mm 180 mm 8.7 Kg
325 mm 180 mm 9.9 Kg
325 mm 180 mm 11.5 Kg
325 mm 180 mm 13.0 Kg
410 mm 210 mm 10.1 Kg
410 mm 210 mm 10.8 Kg
410 mm 210 mm 12.1 Kg
410 mm 210 mm 13.8Kg
410 mm 15.4Kg
210 mm
2. Insert the wire from the pole
through the gland nut and insert
the lamp pole to the lamp.
5. Put inside wires in order, close
the driver box cover and fasten it
with 2 latches.
3. Connect wires (black to voltage,
white to common, green to ground)
directly into the terminal block.
6. Installation finished.
4