Mantenimiento - HPWINNER Alluminia T20A Serie Manual Del Usuario

MANTENIMIENTO

1.Disconnect the quick connectors 2. Disconnect the ground wire.
from the terminal block.
1. Open the side beams outward 2. Loosen the set screws in
with hands. both ends of optical module(s).
IMÁGENES
3. Open the driver box cover to
90°, slide the driver box cover
sideway and remove it.
4. Replace with qualified driver
or other electrical parts
4. Replace with qualified
3. Disconnect the waterproof
module(s), connect the
connectors of module(s).
waterproof connectors, and
tighten the screws in both
sides of module(s).
Conductor y partes eléctricas
5. Install the driver box cover
back in place
Módulo
5. Close the side beams inward
with hands, maintenance
finished.
5