OPERATION
•
Spotlight High Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from "O" to "|" position.
•
Spotlight Low Setting: Locate toggle switch on the handle of the Brite-Nite Spotlight
Lantern and toggle from "O" to "II" position.
•
LED lantern: Locate the switch at the base of the lamp next to the charging input jack.
Slide switch downwards (toward lantern) to turn on.
•
LED Reading Light: Locate the switch at the base of the lamp next to the charging input
jack. Slide switch upwards (toward reading light) to turn on.
CHARGING
DO NOT TURN ON ANY LIGHT FUNCTION WHILE CHARGING. Doing so may damage the unit
and is not covered under warranty. As with all lead-acid cell batteries, when storing, be sure to
recharge the battery fully every 3–6 months to prolong the life of the battery.
AC Charging
Insert the AC charging plug into the charging jack on the base of the lamp, and the transformer
end of the AC adapter into an 120V AC outlet. Leave the locking switch in the downwards
(OFF) position. The LED indicator light will go on, indicating that the spotlight is charging (ap-
proximately 12 hours).
DC Charging
Insert the DC charging plug into the charging jack and the cigarette plug end into the car
cigarette socket. Leave all light switches in the OFF position. The LED indicator light will go on
indicating that the spotlight is charging (approximately 8 hours).
MAINTENANCE
•
If the power cord is broken, it must be replaced by the manufacturer or authorized
personnel.
•
The battery is not intended to be removed from the spotlight by the user.
•
When servicing a spotlight, use only identical replacement parts. Follow instructions
in the maintenance section of this manual. The use of unauthorized parts or failure to
follow maintenance instructions may create a risk of shock or injury.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2014 Wagan Corporation. All Rights Reserved.
4