Troubleshooting - Himimi HZB-12/A Manual De Instrucciones

TROUBLESHOOTING

PROBLEM
"ADD Water" indicator is
on.
"Ice Full" indicator is on.
Ice cubes stick together.
Ice making cycle is
normal but no ice
formed.
POSSIBLE CAUSE
Lack of Water.
Ice is full in basket.
The ice making cycle is
too long.
Water temperature in
inner tank is too low.
Room temperature or
water temperature in
inner tank is too high.
Refrigerant in cooling
system leaks.
Pipe in the cooling
system is blocked.
9
SOLUTION
Stop the ice maker, fill water, and
press "ON/OFF" button again to
restart the unit.
Remove ice from ice basket.
Continuous press "Select" button 5
seconds, the unit could make ice 10
cycles even "Ice" indicator is on.
Stop the ice maker, and restart it
when the ice blocks melt. Select the
small size ice cube selection.
Replace the water. Temperature of
water recommended at 40℉-90℉
The room temperature should be
50℉-105℉, water temperature
should be 40℉-90℉
Verify by a qualified technician.
Verify by a qualified technician.