Descargar Imprimir esta página

Britec AIRPURE BP500-C02 Manual De Instrucciones página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

• Always disconnect the appliance from the power outlet and let it cool before cleaning. Never im-
merse the appliance in water to prevent electric shocks.
• Wipe over the exterior of the appliance with a soft wet cloth and then wipe dry with a dry cloth.
• Please do not use any chemicals or other abrasive cleaning agents, such as stell wool, to clean
• Depending on the pollution degree, the filter should be exchanged after 6-12 months. To do so,
please refer to below steps.
a) Press the upper clasp with both hands lightly;
b) Pull the front panel out;
c) Lift the front panel up.
Pic.7
pic.8
pic.9
Replacement the old filter
a) Drag the slide switch to slide left to remove the filter lock;
b) Take out the filter (note: please tear off the filter packaging plastic bag for the first time);
c) Put in the new filter;
d) Drag the slide switch to slide the lock filter to the right.
Pic.10
pic.11
pic.12
24

Publicidad

loading

Productos relacionados para Britec AIRPURE BP500-C02

Este manual también es adecuado para:

Airpure bp400