Chaumet QUARTZ WATCH WITH SCREW-IN CROWN Manual De Instrucciones página 2

QUARTZ WATCH WITH
SCREW-IN CROWN
HOUR-MINUTE-DATE FUNCTIONS
OR HOUR-MINUTE-SECOND-DATE
FUNCTIONS
Position 0: crown screwed in, normal position
guaranteeing water resistance*
If your watch has a screw-in crown, it must be
correctly screwed in to guarantee your watch's
water resistance (e.g. Class One). Before using the
watch, unscrew the crown which, released by a
spring, will move into position 1.
Make sure that the crown is always screwed in
properly to position 0 after each use: press the
crown against the case while turning it clockwise
to lock it.
Position 1: crown unscrewed*
Position 2: adjusting the date
To adjust the date, pull the crown one notch into
position 2 and turn it anti-clockwise until the desired
date appears.
Do not adjust the date between 8.00 pm and
4.00 am, otherwise you risk damaging the
mechanism.
Position 3: setting the time
To set the correct time, pull the crown out
two notches to position 3 (maximum) and turn it to
the desired setting.
After use, make sure you always push the crown
back to position 1 and then screw it back into
position 0 if your watch has a screw-in crown.
* depending on the model