How to install and dismantle the car holder
Before you install the holder, please read the following tips:
• Install the holder so that both the holder and device do not limit a field of vision or hinder use of
items which are important when driving.
• Do not cover ports and keys designed for operation of smartphone.
• Excessive sunlight (in summer) or cold (in winter) may affect flexibility of the suction hook, and
in effect firmness of holder fixing. Before you use the holder, always remember to check proper
adherence of the holder to the windshield.
How to attach/detach the car holder to/from dashboard (H-CT322 model)
• Clean the installation spot
• Remove protective film from the base of the holder
• Attach the holder to dashboard and firmly press against it
• Make sure the holder fits tight
• To dismantle the holder, gently detach it from the surface
How to attach/detach the car holder to/from windshield (H-CT327, HT1 models)
• Clean the installation spot
• Remove protective film from the suction hook and gently lift the lever
• Attach the base with suction hook to the installation spot, gently press the suction hook and
simultaneously press the suction hook lever so that it is secured
• Make sure the holder adheres to the surface properly
• To dismantle the holder, gently release the suction hook lever. To do so, lift it. Then pull the
outstanding piece of the suction hook towards the windshield
How to attach/detach car holder to air vent (H-CF509, H-CT325, B060 model)
• Clean the installation spot
• Unscrew the knob (does not apply to B060 model) which secures fixing arms
• Place fixing clamps in air vent
• Screw the protective knob
• Make sure the holder adheres to the surface properly
• To dismantle the holder, unscrew the protective know and gently take fixing clamps out
How to install the device on the holder
How to install on the magnetic holder (does not apply to H-CF509 model)
• Unstick the protective film from the metal sheet included in the set