Starting Timer Countdown; Changing The Time; Switching Off The Timer - baraldi BEAUTY Instrucciones De Uso

INSTRUCTIONS FOR USE
2.22

Starting Timer Countdown

The countdown starts 5 seconds after the last operation over the [+TIMER_
KEY] or [-TIMER_KEY] key. A beep sounds and the timer display stop blinking
and also led heater stops blinking if any power is selected.
The last minute will be displayed in seconds.
2.23 Changing the time
When the timer is in countdown the user can change the time at any time by
selecting the heater and touching the timer [+TIMER_KEY] or [-TIMER_KEY]
key, the countdown stops and the timer changes to time selection status waiting
a time selection.
2.24 Timer Countdown End
When the time set on the timer has run out, the timed heater is switched off, the
timer display and the timed heater led starts blinking and a timer alarm beep
sounds for one minute.
The timer alarm can be cancelled by the user at any time, even during the first
minute of the alarm. When the timer is in alarm status, by pressing any key of
the touch control the timer is switched off.
2.25 Switching off the timer
To cancel the operation of the timer, select the time value of "00" using the [-TI-
MER_KEY] key or pressing the [+TIMER_KEY] and [-TIMER_KEY] keys at the
same time.
56 / GB
Fig. 21 - Timer countdown end
USE