Montipower BRISTLE BLASTER AXIAL Manual Del Usuario página 3

®
BRISTLE BLASTER AXIAL
1. Responsibility of the owner and/or the user of the powertool
These operating instructions are included with the Bristle Blaster
accompany it, including at the time of sale. The owner and/or user of the Bristle Blaster
Axial must read these instructions carefully before operating the Bristle Blaster
manufacturer accepts no liability for personal injury or property damage resulting from
improper or inappropriate use of the Bristle Blaster
2. Packaging
Packaging material must be disposed of in accordance with relevant national regulations.
3. Important safety information and safety instructions
The statutory accident prevention regulations and other generally recognized safety and
occupational health regulations as well as the accident prevention regulations for power-
operated equipment must be observed at all times. Any use exceeding such regulations
shall be considered improper and the manufacturer accepts no responsibility for such
use. To ensure safe operation, the Bristle Blaster
repaired by trained and qualified personnel only. Qualified personnel are persons who, on
the basis of their training, experience and instruction, as well as their knowledge of relevant
standards, regulations and accident prevention rules, are authorized to perform the
required tasks and are able to recognize and avoid possible dangers. The operator must
ensure that the persons entrusted with operation, care, maintenance and repair have read
and understood the operating instructions and observe them in all respects in order to:
- prevent danger to life and limb of the user and third parties,
- ensure the operational safety of the Bristle Blaster
- prevent downtime and damage to the environment due to incorrect handling.
Work areas and responsibilities must be clearly defined and observed so that all
competencies are clear and no safety issues arise. Mechanical maintenance work
must be carried out at the prescribed intervals and to the prescribed extent.
Disassembly, shutdown and/or bridging of guards (covers, protective cladding, start guards,
levers, pressure regulators, etc..) can cause injury to persons and material damage to
property. Following maintenance, all disassembled tools must be properly re-assembled
and the tools checked and verified by trained expert personnel to ensure the tool can be
put back into safe operation.
The manufacturer warrants the Bristle Blaster
of Sale and Delivery.
The warranty shall not apply in cases where:
- damage is caused by improper operation,
- repairs or interventions are carried out by unauthorized persons,
- accessories and spare parts are used which are not approved by the manufacturer for
use with the Bristle Blaster
®
®
Axial according to the Terms and Conditions
®
Axial.
Operating instructions
®
Axial and must always
®
Axial.
Axial must be operated, maintained and
®
Axial, and
EN
®
®
Axial. The
3