Commissioning; Assembly / Installation - BEG 977718 Instrucciones De Manejo

3 Commissioning

Please refer to the enclosed dimensions sheet for technical data

3.1 Assembly / Installation

Wear safety gloves when
installing the springs.
- Apply the wheel locks.
- Fit the draw-bar and spring as shown in the illustration.
- Secure draw-bar in place using the enclosed spring cap.
Draw-bar
- Fit the parts enclosed in a parts package as
shown in the illustration.
- Replace the screw plug in the pump tank
by the orange-coloured vent plug.
Operating instructions
Spring
Caution
10