Adjusting The Headrest Height - Babyauto BIRO 01 Manual De Uso

4. Pass the diagonal section of the seat belt through the upper
(J)
guides as shown (fig. 3.5 and 3.6).
5. Take up the remaining slack of the diagonal section of the 3-point
seat belt (fig. 3.6). and make sure it is as tight fitting as possible.
Ensure the straps are not twisted or knotted at any point
4. PlacinG tHe cHild in tHe seat. GrouP 0+
Proper adjustment of the height of the harness ensures the
child will be seated correctly. The harness should be adjusted
to the height of the child's shoulder or slightly above; never
behind the child's back or level with the ears (fig. 4.1).
1. Loosen the harness straps by pulling them gently while
pressing the harness adjustment button
2. Release the buckle
(fig.4.3).
3. Place the child in the seat.
4. Secure the child in the harness by joining the two parts
of the clasp and fastening the buckle
click (fig. 4.4).
5. Gently pull the harness adjustment strap to achieve the
correct tension
ensure the child's safety the harnesses should fit tightly.

5. adJustinG tHe Headrest HeiGHt

Proper adjustment of the height of the headrest ensures the
child will be seated correctly. The headrest should be adjusted
to ensure that the harness straps
height of the child's shoulder or slightly above; never behind
the child's back or level with the ears (fig. 4.1).
1. Loosen the harness straps by pulling them gently while pressing
the harness adjustment button
2. Adjust the headrest according to the child´s height by pulling the
headrest height regulator
of the child´s shoulder or slightly above (fig. 5.2).
All manuals and user guides at all-guides.com
(d)
to make it easier to seat the child
(f)
(fig. 4.5). Remember that in order to
(b)
(e)
(a)
adjusting the harness to the height
(e)
(fig. 4.2).
(d)
until you hear a
should be adjusted to the
(fig. 5.1).
17