Publicidad
Idiomas disponibles
Idiomas disponibles
1.
To reduce the risk of electric shock, insure electricity has
been turned off at the circuit breaker or fuse box before
beginning.
2.
All wiring must be in accordance with the National
Electrical Code ANSI/NFPA 70-1999 and local electrical
codes. Electrical installation should be performed by a
qualified licensed electrician.
3.
WARNING: To reduce the risk of fire or electric shock,
this fan should only be used with fan speed control part
no.:UC7067RYL manufactured by Rhine Electronic Co., Ltd.
4.
CAUTION: To reduce the risk of personal injury, use
only the screws provided with the outlet box.
5. The outlet box and support structure must be securely
mounted and capable of reliably supporting a minimum of 50
pounds. Use only UL Listed outlet boxes marked "Acceptable
for fan support of 22.7 kgs (50 lbs) or less".
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL
INJURY, MOUNT TO OUTLET BOX MARKED ACCEPTABLE FOR FAN
SUPPORT OF 22.7 KGS (50 LBS) OR LESS AND USE SCREWS
PROVIDED WITH THE OUTLET BOX.
6.
The fan must be mounted with a minimum of 7 feet
clearance from the trailing edge of the blades to the floor.
7.
Avoid placing objects in the path of the blades.
1.Safety Rules
All manuals and user guides at all-guides.com
READ AND SAVE THESE INSTRUCTIONS
WARNING
8.
To avoid personal injury or damage to the fan and other
items, be cautious when working around or cleaning the fan.
9.
Do not use water or detergents when cleaning the fan or
fan blades. A dry dust cloth or lightly dampened cloth will be
suitable for most cleaning.
10. After making electrical connections, spliced conductors
should be turned upward and pushed carefully up into outlet
box. The wires should be spread apart with the grounded
conductor and the equipment-grounding conductor on one side
of the outlet box.
11. Electrical diagrams are for reference only. Light kits that
are not packed with the fan must be UL Listed and marked
suitable for use with the model fan you are installing. Switches
must be UL General Use Switches. Refer to the instructions
packaged with the light kits and switches for proper assembly.
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO NOT BEND
THE BLADE BRACKETS (ALSO REFERRED TO AS "FLANGES")
DURING ASSEMBLY OR AFTER INSTALLATION. DO NOT
INSERT OBJECTS IN THE PATH OF THE BLADES.
WARNING
TO REDUCE THE RISK OF SHOCK. THIS FAN MUST BE
INSTALLED WITH AN ISOLATION WALL CONTROL/SWITCH.
WARNING
THIS PRODUCT CONTAINS CHEMICALS KNOWN TO THE STATE
OF CALIFORNIA TO CAUSE CANCER, BIRTH DEFECTS AND/OR
OTHER REPRODUCTIVE HARM. THOROUGHLY WASH HANDS
AFTER INSTALLING, HANDLING, CLEANING, OR OTHERWISE
TOUCHING THIS PRODUCT.
Publicidad
