Velcro - Silvercrest SCAA 5.00 A1 Manual Del Usuario E Información De Seguridad


Next mount the adapter at the desired position by using the four screws. You can
mount the adapters on the water-resistant case as well as on the water-resistant and the
open back cover.

Velcro

You can use a Velcro to mount the water-resistant case on uneven surfaces, for example. The
camcorder is supplied with one Velcro with and one Velcro without latch. For instance, you
can mount the Velcro with latch as follows:

Pass the Velcro through the guiding slots of the adapter. Make sure to place the smooth
side of the Velcro inside. Then pass the Velcro through the latch and fix its end as
shown in the following figure:
If the Velcro with latch is not suitable for the current application, you can
also use the Velcro without latch.
SilverCrest SCAA 5.00 A1
English - 137