Trevi MAX 10 Manual De Usuario página 26

• Use a soft, dry cloth to clean the mobile phone, battery and charger.
• Please do not use alcohol, thinner, benzene or other solvents to wipe the mobile phone.
• A dirty outlet will cause poor electrical contact, lose of power and even inability to
recharge. Please clean regularly.
Installation
- Carefully remove the rear cover by levering the side of the rear furniture that has the
opening, as shown below;
- Insert the SIM into the SLOT with the metal contacts facing down and taking care to
respect the position of the cut corner of the SIM;
- Insert the battery paying attention to the metal contacts;
- Reposition the rear cover carefully, taking care not to damage the plastic anchors;
- Before using the appliance for the first time, fully charge the battery, using the supplied
USB cable and power supply.
Note regard Micro-SIM adapter used on Trevi phones
The slots for SIM cards are designed to accommodate only the consideration SIM format.
The use of SIM (micro or nano) with its adapter and 'not recommended as it can cause
damage to the device and the micro/nano SIM itself.
Warning:
• TREVI not liable for damages caused by the use of adapters for micro/nano-SIM.
• TREVI reserves the right to refuse free assistance in warranty on defective products
that have 'caused by the use of the SIM adapters for micro/nano-SIM.
• Do not insert memory card into the SIM card slot.
SIM card and battery installation
Nano SIM card with adapter
26