Micro Sd Card Installation; Battery Recharge - Trevi MAX 10 Manual De Usuario

To store photos, videos, and music should insert a micro SD external memory.
• Carefully remove the back cover;
• Insert the micro SD card keeping the surface with the electrical contacts facing down
(display side);
• Replace the back cover.
Notes:
• Some card brands may not be compatible with the phone. The use an incompatible
memory may be damaged or the card memory itself.
• The appliance only supports memory formatted in FAT. If you enter formatted cards
differently the phone will ask you to reformat the memory card.
CHARGING THROUGH POWER SUPPLY:
1. Turn off the device, connect the Micro USB plug of the supplied cable to the Micro
USB phone (to use the supplied cable only);
2. Connect the USB outlet on the same power supply cable and plug the latter to a standard
wall outlet;
3. The device will switch on to show the battery icon with the charging phase for a few
seconds. To view, at any time, the level of charge just press any key on the phone;
4. When the battery is fully charged (the icon will no longer be moving), you can disconnect
the power supply from the mains socket and then disconnect the Micro USB plug from
the phone.
RECHARGING THROUGH "RECHARGING BASE"
1. Connect the Micro USB socket of the cable supplied to the Micro USB socket of the

Micro SD card installation

Battery recharge

27
(SUPPLIED):