Switching On/Off; Using Horizontal And Vertical Laser Lines; Working With The Automatic Leveller - Parkside PKLLP 360 B2 Instrucciones De Utilización Y De Seguridad

˜ Switching on/off
CAUTION! Laser beam ‒ Do not look into the beam
Turn your head away or close your eyes to prevent looking into
the laser beam . Risk of eye injury!
Switching on: Briefly press the on/off button
Switching off: Press and hold the on/off button
˜ Using horizontal and vertical laser lines
After switching on, the 360° laser line
line are activated .
[ 18 ]
Activate the 360° laser line
Briefly press the on/off button
Activate the vertical laser line
Briefly press the on/off button
˜ Working with the automatic leveller
1 . Push the levelling slide switch
2 . Place the product on a horizontal, solid surface or fasten the product
to a tripod (see "Working with the tripod") .
3 . Switch on the product . The leveller light
Leveller light
Green
Red
NOTE: In the event of vibrations, the laser will level itself
automatically . Wait until the laser lines no longer move .
26 GB/IE
only:
1 ] [
.
16 ] [
only:
18 ] [
.
[ 16 ]
to the left (open lock) .
[ 14 ]
Meaning
[ 17 ]
Automatic levelling is possible . Levelling
is complete once the laser lines no longer
move .
Automatic levelling is not possible .
The laser lines flash .
.
16 ] [
for 2 seconds .
16 ] [
and the vertical laser
1 ] [
lights up .
17 ] [
!
1 ] [ 18 ] [