Maintenance And Storage - Parkside PBHA 12 A1 Traducción Del Manual De Instrucciones Original

PREPARATION
• Before each use, carry out a visual in-
spection on missing or wrongly mounted
protective devices or parts of the cutting
device.
• Before commissioning and after any
impacts, check for signs of wear and
damages, and have any necessary re-
pairs performed.
OPERATION
• Wear ear protection. Exposure to noise
can cause hearing loss.
• Hold the appliance by the insulated
gripping surfaces when performing
work in which the tool may come into
contact with hidden wiring. Contact
with a live wire can also cause a char-
ge in metal parts of the appliance and
result in an electric shock.
• Wear a dust protection mask.
WARNING! TOXIC DUST!
• Working with harmful/toxic dust repre-
sents a health hazard for the operator
or persons in the vicinity.
• CAUTION CABLES! DANGER!
Make sure that you do not come into
contact with electricity, gas or water
pipes/lines when working with the
power tool. If necessary, test with a
cable detector before drilling into a wall
or cutting into it.
• Original accessories
Only use accessories that are specified
in the operating instructions and/or that
are compatible with the device.

MAINTENANCE AND STORAGE

• Remove the removable battery before
carrying out maintenance or cleaning
work.
• Use only spare parts and accessories
supplied and recommended by the ma-
nufacturer.
• The machine must be checked regularly
and maintained. Have the machine
repaired in a licensed workshop.
8) ADDITIONAL SAFETY
INSTRUCTIONS
a) Hold the appliance by the insu-
lated gripping surfaces when
performing work in which the
tool may come into contact with
hidden wiring. Contact with a live
wire can also cause a charge in metal
parts of the appliance and result in an
electric shock.
b) Hold the device by the insulated
gripping surfaces when per-
forming work in which the cut-
ting tool may come into contact
with hidden wiring or its own
cord. If the screw were to come into
contact with a live electrical cable,
metal parts of the appliance could
also become live and cause an electric
shock.
c) Ensure that the vents are free of soiling.
d) Remove the battery pack from
the power tool
- whenever the user no longer remains
in the vicinity of the machine.
- before the removal of blockages.
- before checking, cleaning or working
on the machine.
- after touching a foreign body in order
to check the machine for damage.
- for an immediate check if the machine
begins to vibrate excessively.
e) Do not use any accessories
that are not recommended by
PARKSIDE. This can result in electric
shock or fire.
GB IE
25