Usb Operation; Tape Operation - Roadstar HIF-1899TUMPK Manual De Instrucciones

CD-MP3 OPERATION
1. Press the [CD] button (9);
2. Press [OPEN/CLOSE] (18) to
label up in the CD compartment.
3. Close the [CD DOOR]
automatically from the first track.
PROGRAMMING
Up to 99 tacks (MP3, 20 in CD) can be programmed and play in any order.
1. Stop the playback by pressing [STOP] (14);
2. Press [PLAY MODE] (17), the display (6) will show "P01" and flash;
3. Select desired track by using
4. Press [PLAY MODE] (17) again to confirm desired track into the program
memory;
5. Repeat step 3 and 4 to enter additional tracks into the program memory.
6. When all the desired tracks have been programmed, press [PLAY] (13) to play
the disc in the order you have programmed.
Note: Press [STOP] (14) twice to terminate programmed play.

USB OPERATION

1. Press the [CD/USB] button (9);
2. Plug an USB stick into the [USB PORT] (1);
3. Press the [FUNCTION] button (4) to select USB mode;
4. Playback will start automatically from the first track.
PROGRAMMING
The PROGRAMMING operation is the same as that of CD-MP3.
Notes:
Some mp3 player may not be able to play via the usb socket. this is not a maul-
•
function of the system.
To avoid damage to USB memory, remove it only when the radio is turned off.
•
The USB port is not designed for charging smartphones or other devices.
•

TAPE OPERATION

1. Press the [TAPE] source button (10);
2. Insert a cassette TAPE into the [CASETTE MECHANISM] (22);
3. The system will start playback automatically;
Press [TAPE FORWARD/EJECT] button (21) half way during playback to start ra-
•
pid tape winding in forward direction.
Slightly press the [TAPE FORWARD/EJECT] button (21) again to resume
•
playback.
Press the [TAPE FORWARD/EJECT] button (21) completely inwards and the cas-
•
sette tape will be ejected.
open the [CD DOOR]
(12). Focus search is performed and playback will start
[SKIP -/+] buttons (15/16);
English
(12) and place a CD with the
4