Battery Charger; Technical Specifications - Worcraft PROFESSIONAL CLC-20V-2.4D Manual

Tabla de contenido

Publicidad

BATTERY CHARGER

TECHNICAL SPECIFICATIONS

Article number
Input
Output
Charging time for battery capacity,
approx.
-2.0Ah
-2.5Ah
-3.0Ah
-4.0Ah
Protection class
PRODUCT ELEMENTS
1
2
SAFETY
instructions. Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Use the battery charger only when you fully understand and can
perform all functions without limitation, or have received
appropriate instructions.
Safety Notes
This charger is not intended for use by children and
persons with physical, sensory or mental limitations or a
lack of experience or knowledge. This charger can be used
by children aged 8 and above and by persons who have
physical, sensory or mental limitations or a lack of
experience or knowledge if a person responsible for their
safety supervises them or has instructed them in the safe
operation of the charger and they understand the
associated dangers. Otherwise, there is a danger of operating
errors and injuries.
Supervise children during use, cleaning and
maintenance. This will ensure that children do not play with the
charger.
Only charge WORCRAFT lithium-ion batteries with a
capacity of 1.5 Ah or more (4 battery cells or more). The
battery voltage must match the battery charging voltage of
the charger. Do not charge non-rechargeable batteries.
Otherwise there is danger of fire and explosion.
Keep the battery charger away from rain or moisture.
Penetration of water in the battery charger increases the risk of
CLC-20V-2.4D
230VAC, 50Hz, 130W, 0.8A
21,4 VDC 2.4A x2
50min
62min
75min
100min
Battery pack
Red light
Read all safety warnings and all
3
Green light
4 1.
Charging compartment
an electric shock.
Keep the battery charger clean. Contamination can
lead to danger of an electric shock.
Before each use, check the battery charger, cable
and plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself. Have
repairs performed only by a qualified technician and
only using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of an electric
shock.
In case of damage and improper use of the battery,
vapours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can
irritate the respiratory system.
Do not operate the battery charger on easily
inflammable surfaces (e. g., paper, textiles, etc.) or
surroundings. The heating of the battery charger during
the charging process can pose a fire hazard.
Do not cover the ventilation slots of the battery
charger. Otherwise, the battery charger can overheat and
no longer operate properly.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Fig 1.

Publicidad

Tabla de contenido
loading

Productos relacionados para Worcraft PROFESSIONAL CLC-20V-2.4D

Tabla de contenido