Handpresso Domepod 23-10013 Instrucciones De Uso página 6

1
2
3
4
5
6
7
10
8
9
10
11
12
13
14
instructions for use with E.S.E. pod adapter
1 Insert the E.S.E. pod adapter by pushing it in the filling hole until
you can hear or feel a click.
2 Check that the infusion button is up.
3 Unlock the pump by twisting the handle 90°.
4 Pump up to 16 bar (green zone), and lock the pump by twisting
the handle 90°. Beware not to reach the red zone (over 16 bar)! To
make pumping easier, place your hands as on the illustration.
5 Turn round the machine so you have the portafilter in front of
you.
6 Remove the portafilter by unscrewing it 60° counterclockwise.
7 Pour hot water in the reservoir, through the filling hole, from a
kettle or a thermos flask. Pour the water slowly. Don't be surprised
by the small capacity of the reservoir (1,76 fl.oz. / 50 ml).
8 Place an E.S.E. pod in the E.S.E pod adapter.
9 Lock the portafilter by rotating it 60 degrees clockwise up to
the locking indicator. Otherwise, the use of the machine could be
dangerous!
10 Flip the machine around and place it over your cup. Push the
start button and serve a premium quality espresso.
11 When the cup is filled as wished, stop the machine by pushing
the infusion button up with your finger. The pressure of the
machine is thereby released and the flow of coffee will stop.
12 Turn round the machine and re-open it. Always check that the
infusion button is up before removing the portafilter!
13 Remove and dispose of the E.S.E. pod. BEWARE of the hot
water which may still be in the water reservoir
14 Finally, relax and enjoy your espresso.
11