Error Code Definition - Youin MONT BLANC BK5000 Manual De Usuario

8. LCD Display
Controller Information
Press the or (<0.5S) button and select "CTRL
Info", and then press the (<0.5S) button to confirm.
Now you can read the controller information. To Exit
press the (<0.5S) button, once "EXIT" is highlighted
to return to the information settings.
Display Information
Press the or (<0.5S) button and select Display
Info, then press the
software and hardware data in the display. To Exit
press the (<0.5S) button, once "EXIT" is highlighted
to return to the information settings.
Torque Information
Press the or (<0.5S) button and select "Torque
info", then press the
software and hardware data in the display. To Exit
press the (<0.5S) button, once "EXIT" is highlighted
to return to the information settings.
Error Code
Press the or (<0.5S) button and select "Error Code", and then press the (<0.5S)
button to confirm. It shows error informa- tion for the last ten errors of the pedelec.
Error code "00" means that there is no error. To return to the menu press the (<0.5S)
button, once "BACK" is highlighted to return to the information settings.

8.7 Error code definition

The display can show the errors of a pedelec. If an error is detected, the wrench icon
appears on the display and one of the following error codes will be displayed.
Note: Please read the description of the error code carefully. If you see the error code,
restart the system first. If the problem is not resolved, please contact your dealer.
Error Declaration
04
The throttle is not back in its
correct position.
(<0.5S) but- ton to read the
(<0.5S) button to read the
Troubleshooting
Check the throttle can adjust back into its correct
position, if the situation does not improve, please
change to a new throttle.(only with this function)
29
ENGLISH