Eu Declaration Of Conformity; Technical Data - EUCHNER GS C1806 Serie Manual De Instrucciones

Operating Instructions
Precision Multiple Limit Switches GS...C1806 12 mm
Exclusion of liability and warranty
In case of failure to comply with the conditions for
correct use stated above, or if the safety regula-
tions are not followed, or if any servicing is not
performed as required, liability will be excluded and
the warranty void.

EU declaration of conformity

The declaration of conformity is part of the operating
instructions, and it is included as a separate sheet
with the device.
The original EU declaration of conformity can also
be found at: www.euchner.com
Service
If servicing is required, please contact:
EUCHNER GmbH + Co. KG
Kohlhammerstraße 16
70771 Leinfelden-Echterdingen
Service telephone:
+49 711 7597-500
E-mail:
support@euchner.de
Internet:
www.euchner.com

Technical data

Parameter
Housing material Die-cast aluminum, anodized
Plunger material Stainless steel
Degree of protection IP67
Mech. operating cycles ES502E/ES508E
Switching frequency ES502E
ES508E
Ambient temperature -5 ... +80 °C
Installation orientation Any
Approach speed, max.
Plunger Chisel D 40 m/min
Roller R (slide bearing) 80 m/min
Roller B (ball bearing) 120 m/min
Dome W/ball K 10 m/min
Approach speed, min. 0.01 m/min
Actuating force ES502E
with switching element ES508E
Switching element
ES502E 1 NO + 1 NC contact
ES508E 1 pos. driven contact
Switching principle
ES502E Snap-action switching contact
ES508E Slow-action switching contact
Hysteresis ES502E
Contact material
ES502E/ES508E Silver alloy, gold flashed
Connection Screw terminals
Tightening torque of screw terminal
ES502E/ES508E
0.6 Nm
(cross-head screw)
Conductor cross-section (rigid/ 0.34 ... 1.5 mm
flexible)
Rated insulation voltage U = 250 V
i
Rated impulse withstand voltage
ES508E U = 4 kV
imp
ES502E U = 2.5 kV
imp
Utilization category of switching element acc. to IEC 60947-5-1
ES502E AC-12 250 V
ES502E/ES508E AC-15 230 V
DC-13 24 V
Switching current, min.,
at DC 24 V ES508E
at DC 12 V ES502E
Convent. thermal current I
th
ES502E 8 A
ES508E 10 A
Short circuit protection acc. to IEC 60269-1 (control circuit fuse)
ES502E 8 A gG
ES508E 10 A gG
Conditional short-circuit current 100 A
Reliability values acc. to EN ISO 13849-1
for switching elements ES508E
B 2 x 10
7
10D
5
ES502E
Value
30x10
6
ES508E
300 min
-1
50 min
-1 Illustration: switching element not actuated
Fig. 1: Switching elements and terminal assignment
≥ 20 N
≥ 15 N
0.8 mm
2
8 A
6 A
6 A
10 mA
10 mA
22 21
14 13
22 21