Operation - Bartscher Panorama Instrucciones De Uso

•
After a power failure or removal of the plug, leave the device unconnected for
at least 5 minutes.
•
The electrical circuit must be secured to a minimum of 16A. Only connect the device
to a wall socket, do not use splitters or power strips.
•
Ensure the device's plug is easily accessible if it becomes necessary to quickly
disconnect the device.

5.3 Operation

•
After unpacking the device and before connecting it, clean the device following the
instructions in 6.2 "Cleaning".
•
Connect the device to the grounded single socket and start it with use of ON/OFF
switch. The red light, integrated with the switch, will come on.
•
The digital display will show the temperature and the LED cooling indicator will
come on.
•
The device should reach the set temperature before food and beverages are
placed inside.
Digital temperature regulator
⑫
⑬
⑱
⑫
Increase temperature button
⑬
LED cooling indicator
⑭
LED defrost indicator
⑮
LED lighting button
⑯
Settings button
⑰
Digital display
⑱
Decrease temperature button
⑭
⑰
⑮
⑯
- 27 -