Mechanical Dimensions - Danfoss VLT Micro Drive FC 51 Guía Rápida

Quick Guide

1.3.2 Mechanical Dimensions

A template for drilling is found on the flap of the packaging.
B
Ø 7mm
b
C
a A
M5
Illustration 1.1 Mechanical Dimensions
Power [kW (hp)]
Enclosure 1x200–240 V 3x200–240 V 3x380–480 V
0.18–0.75 0.25–0.75
M1
(0.24–1.0) (0.34–1.0)
M2 1.5 (2.0) 1.5 (2.0)
2.2–3.7
M3 2.2 (3.0)
(3.0–5.0)
M4 –
M5 –
Table 1.2 Mechanical Dimensions
1) For LCP with potentiometer, add 7.6 mm (0.3 in).
NOTICE
All cabling must comply with national and local regulations on cable cross-sections and ambient temperature. Copper
conductors required, 60–75 °C (140–167 °F) recommended.
MG02BC4P
Quick Guide•Kurzanleitung•Guide rapide•Guía rápida•Guia Rápido•Краткое
руководство
B
Ø 7mm
b
C
a A
M4
A
0.37–0.75 150
(0.5–1.0) (5.9)
1.5–2.2 176
(2.0–3.0) (6.9)
3.0–7.5 239
(4.0–10) (9.4)
11.0–15.0 292
–
(15–20) (11.5)
18.5–22.0 335
–
(25–30) (13.2)
Danfoss A/S © 10/2017 All rights reserved.
B
Ø 5.5mm
b
C C
a A
M2
M3
Height [mm (in)]
[mm (in)]
A (including
a
decoupling plate)
140.4 70
205 (8.1)
(5.5) (2.8)
166.4 75
230 (9.1)
(6.6) (3.0)
226 90
294 (11.6)
(8.9) (3.5)
272.4 125
347.5 (13.7)
(10.7) (4.9)
315 165
387.5 (15.3)
(12.4) (6.5)
B B
Ø 4.5mm
Ø 4.5mm
b b
C
a A
a A
M1
Width 1) Maximum
Depth
weight
[mm (in)]
B b C [kg]
55
148 (5.8) 1.1
(2.2)
59
168 (6.6) 1.6
(2.3)
69
194 (7.6) 3.0
(2.7)
97
241 (9.5) 6.0
(3.8)
140
248 (9.8) 9.5
(5.5)
1 1
9