Restricting New Device Connections; Custom Network Ssid Labels - Shure MXCW Microflex Manual Del Usuario

Restricting New Device Connections

The devices tab in the web application shows which conference units are connected to the SSID network by separating them
into 3 groups: online, offline, or unregistered. By default, conference units automatically register once they are connected.
You can add or remove devices from registration. Select a device, open
press Deregister to move a device to the unregistered group. Select a device from the unregistered group, then open
options from the device properties panel and press Register to register a unit.
To determine additional device connections, select one of the following options from the dropdown on the Devices tab:
• Open (default): New devices will automatically connect and register.
• Restricted: New devices will connect to the SSID network, but will be on the unregistered list until registered manually.
• Private: No new devices can connect or register to the audio system.

Custom Network SSID Labels

It is recommended to change to a custom wireless network after getting up and running on the default network:
• Recognizable: Provide distinct names for your installation. Useful names correlate to a room or common use of the sys­
tem (examples: SSID=Training or SSID=3NW)
• Security: Customs SSIDs are less likely to inadvertently connect unwanted wireless microphones.
• Automatic Updates: All connected devices automatically update to match the new network label.
To customize the network SSID label:
Settings > SSIDs.
1. Go to
2. Select an SSID and rename it. Choose names (up to 32 characters) that make sense for your installation or use case.
Note: The default SSID 00 is not editable.
3. (Optional) Press Push to devices to update the static SSID list on all devices connected to this access point The device
startup mode must be set to static list.
more options from the device properties panel, and
Shure Incorporated
more
31/93