Anet A8 Manual Del Usuario página 8

All manuals and user guides at all-guides.com
Dear customer:
Thanks for choosing and using Anet 3D printer. For your convenience, please read the instructions
carefully before using them and follow the instructions strictly.
Special Version:
1. All the contents in this manual have been checked carefully. If there is any misprint or misunder-
standing of them, Anet reserves the right to interpret it.
2. This user manual is for reference only and does not constitute any form of commitment.
3. It is recommended to use Anet original filament.
In order to prevent damage to you and others in the process of using, Please be aware of the following:
1. Use Instruction
● Please do not attempt to use the machine in any way undescribed in the instructions to avoid
accidental personal injury and property damage.
● Please do not place this machine near inflammable and explosive materials or high heat sources.
Please place this machine in a ventilated, cool and dust free environment.
● Please do not place the printer on a larger vibrating or other unstable platform. The shaking of the
machine will affect the printing quality.
● Please do not replace the power line of other products during installation. Please use the original
power line supplied with the machine. The working power supply uses 110V/220V AC. The power plug
must be plugged into the three holes socket with ground wire to avoid damage to components or
accidents such as fire and electric shock.
●Please do not touch the nozzle and heating bed during the printer working to prevent high
temperature burns and personal injury.
● Please do not wear gloves or wrappers when operating the machine in case the movable parts cause
entanglement and cutting damage on the human body parts.
● After printing, please use the remaining temperature of the nozzle to clean up the filament on the it
with the help of tools. Do not touch the nozzle directly with your hands during cleaning to prevent
scalding.
● Please often do product maintenance. In the circumstance of power off, please regularly clean the
printer body with dry cloth to wipe away dust and bonded printing materials, foreign objects on guide
rails, and lubricating oil is recommended for sliding parts, screw rods and bearing parts.
07
Quick User Guide
If you have any problems with the product, you can obtain
relevant services through the following channels:
Facebook after - sales group:
www.facebook.com/groups/anet3dprintersupport
Anet official website: www.anet3d.com
After ‒ sales service email: anet@anet3d.com
Anet-A8