Before each use of the blender check the following:
•
The container must be firmly secured to the blender
•
The lid on the container must be securely closed
•
The RPM controller must be set to LOW speed
Further instructions:
1. After filling the container with necessary ingredients turn on the blender and gradually increase
speed using the RPM controller until you reach the desired speed.
2. For mixing ice or food which requires short-term maximum power, press and hold the PUL-
SE button. When using this function, it is necessary to have both lids well fitted on the container
and to hold these lids with your hands to make sure that the impact of moving food will not cause
opening of the lid.
3. After completion of mixing, turn off the blender by switching the left button to the OFF position.
Safety warning:
1. Pulse button is intended for breaking up of ice and other foods which require a high RPM rate
for a short period of time. Do not turn the appliance on without liquid for longer than 2 minutes
as it may result in overheating and burning of the appliance.
2. Do not insert any metal objects such as knives, forks, spoons etc. into the container. When
using the tamper, make sure the lid is properly placed on the container.
3. Before cleaning make sure the unit is unplugged from the electrical outlet, and only after that
separate the container from the motor unit.
4. Do not wash the blades with bare hands, they are very sharp. Use a brush or cleaning cloth.
5. NEVER immerse the motor unit into water and do not wash it in the dishwasher.
6. Before turning the appliance on, make sure the lid is properly placed on the container. Make
sure the container is properly secured to the motor unit.
7. When turning the blender on, we recommend holding the lid of the container with your hands.
8. The appliance cannot be used by persons (including children) with limited physical, sen-
sual or mental abilities or with lack of experience and knowledge, unless they are supervised
by an adult.
9. Do not let children use or play with the appliance. When the blender is in use, keep children
in a safe distance.
10. When the appliance is not in use, keep it unplugged from the wall outlet.
11. In case of overload of the blender the overload protection switch is activated and the blender
turns off. In such case reduce the amount of food in the container by one half and press the red
button on the bottom of the blender in order to continue.
12. If the blender malfunctions, unplug it from the wall outlet and wait until the motor temperature
drops. If the blender still does not operate normally, contact an authorized service center.
13. If the power cable is damaged, the replacement must be performed by an authorized service
center or a qualified person.
The English version of the manual is an exact translation of the original manufacturer's instructions.
Images used in this manual are for illustrational purposes only and may differ from the actual product.
All manuals and user guides at all-guides.com