Operation - Kärcher K 2.20 M Manual Del Usuario


The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.

The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.

For safety reasons, we recommend that you
operate the appliance only via a earth-leak-
age circuit breaker (max. 30 mA).

Cleaning operations which produce oily
waste water, e.g. engine washes, underbody
washes, may only be carried out using wash-
ing stations equipped with an oil separator.
Safety Devices
Caution
Safety devices protect the user and must not be
modified or bypassed.
Power switch
The appliance switch prevents unintentional op-
eration of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
– The stability of the appliance is warranted
when it is placed onto an even surface.
12
All manuals and user guides at all-guides.com
When unpacking the product, make sure that no
accessories are missing and that none of the
package contents have been damaged. If you
detect any transport damages please contact
your dealer.
Illustrations on Page 2
1
2
3
4
5
6
7
8
9
10 Coupling element for water connection
11 Mains cable with mains plug
12 Bearing wheel
13 Trigger gun
14 Lock trigger gun
15 High pressure hose
16 Clamp for high pressure hose
17 Spray lance with high pressure nozzle
18 Spray lance with Dirtblaster
Special accessories
Special accessories expand the possibilities of
using your appliance. Please contact your
KÄRCHER dealer for further information.
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 2
Illustration

Illustration

Illustration

Illustration


– 5
EN

Operation

Description of the Appliance
Swivel casters
Appliance switch "0/OFF"/ „I/ON"
Detergent suction hose (with sieve)
High pressure connection
Carrying handle
Storage for spray lance
Storage for mains connection cable
Cable clamp for mains connection cable
Water connection with integrated sieve
Before Startup
Insert the steering rollers and lock them.
Insert the transport wheels and lock them.
Pull out the clamp for the high-pressure hose
from the trigger gun (e.g. a small screwdriver).
Connect high pressure hose to trigger gun.
Push the clamp in until it locks. Check the se-
cure connection by pulling on the high-pres-
sure hose.