Operating Instructions - Kobalt SGY-AIR221 Manual Del Usuario

ASSEMBLY INSTRUCTIONS
3. Place 2-3 drops of air tool oil (not provided)
into the male plug before each use
(See Figure 3).
4. Connect the air supply hose to the male
plug. Set the working pressure at 90 PSI for
best tool performance (See Figure 4).
NOTE Working pressure refers to the air line
pressure set to tool when tool is under
working conditions.

OPERATING INSTRUCTIONS

1. Press down on the trigger (F) to start the
tool (See Figure 1).
All manuals and user guides at all-guides.com
11
3
4
1
F