Frigidaire FAP09C3AJW Manual De Instrucciones página 16

4. Close the window sash securely
against the window slider kit.
5. Cut the foam seal to an appropriate
length and seal the open gap
between the top window sash and
outer window sash, as shown in
Fig.16.
Installation in a sliding sash window
1. Cut the foam seals(adhesive type)
to the proper lengths and attach
them to the window frame.
2. Attach the window slider kit to the
window stool. Adjust the length of
the window slider kit according to
the height of window.
29
All manuals and user guides at all-guides.com
Window slider kit
Window stool
Foam seal
Foam seal A
(adhesive type)
Window
slider kit
67,6cm ~
123,2cm
3. Cut the adjustable window slider
kit if the height of window is less
than 67.6cm. Open the window
sash and place the window slider
kit on the window stool.
4. Close the sliding sash securely
against the window slider kit.
5. Cut the foam seal to an appropriate
length and seal the open gap
between the sliding sash and outer
window sash.
Exausting hot air
In the cooling Mode the appliance must be placed close to a window or
opening so that the warm exhaust air can be ducted outside.
1. Take the hose out from back of the
unit.
2. Remove adaptor A from unit by
sliding sideways.
Foam
seal
30