Technical Data; Slow Juicer Components; Operation; Assembly - URSUS TROTTER UT-BRONTE150 Manual De Usuario

physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
• supervision or instruction concerning use of the
appliance in a safe way and if the hazards involved
SAVE THESE INSTRUCTIONS
DATA TECHNICAL DATA
Rated Voltage
Rated Power
Rated Frequency
Speed

SLOW JUICER COMPONENTS

PULP COLLECTOR JUICE COLLECTOR

OPERATION

The Slow Juicer is virtually assembled straight out
of the box. We suggest taking it apart and washing
the removable parts in warm water with non-
abrasive liquid detergent before the first use. Rinse
thoroughly with warm water and allow to air dry.
This will eliminate any traces of dust or residue from
manufacturing or shipping. Never submerge the
Slow Juicer motor base in water or any other liquid.

ASSEMBLY

1. Assemble the bowl to the base. (Figure 1)
a. Make sure the bowl fits all the way into the shell
of the base.
b. Align the arrow on the bowl with the arrow on
220-240V AC the base, twist clockwise slightly to lock. (Note: If
150W the bowl is not completely locked onto the base, the
50/60Hz machine will not start.)
50RPM
2. Assemble the Strainer and Rotating Basket to the
bowl. (Figure 2)
a. Put flat filter in a bowl
3. Place the Auger in the center of the bowl. (Figure
3) a. Twist the Auger clockwise until it drops into
place.
SWITCH