Parts Information; Control Panel; Control Panel Indicators; Pc Power Button - Rimage Professional 3400 Guia Del Usuario

Parts Information

Control Panel

The control panel is located on the front of the 3400 and
5400N. It includes the operator panel, the rotate carousel
button (button 1), and the printer tray button (button 2). The
control panel allows you to monitor and control the system.
 Note: You must open the front door of the autoloader to
access the control panel.
The table below identifies the name and function of all parts
of the control panel.

Control Panel Indicators

Name
Operator panel
Rotate carousel button
(button 1)
Printer tray button
(button 2)
Printer indicator light (on the
printer tray button)
Rotate carousel indicator
light (on the rotate carousel
button)

PC Power Button

Only the 5400N has the PC power button. The PC power button powers on the embedded computer. Refer to the
the Professional 3400 and 5400N

Disc Dispenser

When a disc is complete, the lift arm places discs on the disc dispenser. The disc dispenser moves completed discs to the
output bin on the left side of the autoloader. The output bin holds up to 5 discs. Refer to the
Specifications section on page 10 for more information.
2001431_B
All manuals and user guides at all-guides.com
Function
The operator panel has a two-line display that informs you of operations or conditions
that require operator intervention. This includes the consumable status. The 5400N
displays the name of the embedded PC after initialization. Refer to the
Utilities section on page 41 to see other options.
Press the rotate carousel button to
• Rotate the carousel and position a bin to load and unload discs. Each time you press
the rotate carousel button, the carousel rotates to the next bin.
Tip: The carousel will rotate to a bin only after the autoloader has completed
initializing.
• Enter diagnostic test mode
Press the printer tray button to:
• Open and close the printer tray
• Reset after an error
The printer indicator light illuminates when the printer is powered on and has completed
initialization.
The printer indicator light flashes when the Everest 400 printer is receiving data from the
host.
The rotate carousel indicator light illuminates when you rotate the carousel.
The rotate carousel indicator light flashes when the autoloader is receiving data from the
host.
section on page 19 for more information.
Operator
Rotate
Panel
Carousel
Button
Professional 3400 and 5400N
Printer Tray
Button
Operate Gemini
Operate
17