Chuango RV-500 Manual Del Usuario página 6

EN
1. Tap [+] on the home page. Then, select "Home Appliances"and then follow the
device set-up steps to connect the Robot with your home Wi-Fi.
Long press the Recharge and Spot Cleaning buttons simultaneously for 3 seconds
until the Wi-Fi indicator flashes slowly. Tap "Confirm" on the app to fill in your home
Wi-Fi SSID and password. Then connect your phone to the device's hotspot "Robot
Vacuum RV-500". Wait for the device to be connected.
Step 3. App Control
1. Device Name
2. Battery Status
3. Shortcut Buttons: Clean, Dock, Fan and Mode.
Tap Clean, the Robot will start cleaning.
Tap Dock, the Robot will go back to the charging dock to get recharged.
Tap Fan to select different suction power from the following: Quiet, Standard, Max
and Max+.
Tap Mode to select the cleaning mode that suits your need best from Auto cleaning,
Edge cleaning, Spot cleaning and Random cleaning.
Auto cleaning: At the start of a cleaning cycle, the Robot will map out your home
and clean open areas efficiently. Once the Robot finishes its cleaning cycle, it will
return to the charging dock to recharge. Or if its battery gets low before finishing a
cleaning cycle, the Robot auto returns to the dock to recharge. It cleans up to 150
minutes.
After the Robot finishes with the open areas of your floor, it uses Edge cleaning to
ensure it has cleaned along walls and around furniture legs.
EN