Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Edge cleaning:
You can also tap Edge cleaning to have a quicker cleaning along the
walls. It cleans up to 20 minutes.
Spot cleaning:
Robot intensely cleans a localized area by spiraling outward about
1 meter in diameter and then spiraling inward to where it started. It cleans up to 2
minutes.
Random cleaning:
No particular cleaning pattern. It cleans up to 150 minutes.
Main Page
① Settings:
Tap to change device name, check device information and cleaning records.
② Cleaning status:
This shows the cleaning time and space.
③ Battery status:
This shows the device battery usage status. If battery is low when
cleaning, the Robot will go back to the charging dock, or you can tap dock button to
recharge the device.
④ Device status:
This shows current status of the Robot: standby, cleaning under selected
mode, charging or charging completed.
⑤ Direction control:
You can direct the Robot to clean a designated area by tapping the
direction buttons.
Note:
Under modes other than Random mode, if you want to change the cleaning direction of the robot, you
must pause the ongoing cleaning first, then adjust the directions of Robot.
⑥ Fan mode:
Tap to change suction mode: Quiet, Standard, Max or Max+.
⑦ Cleaning mode:
Tap to change the cleaning mode.
⑧ Find the Robot:
Tap Find the Robot, the device will make a sound and the indicator will
flash pink color to let you know where it is.
⑨ Cleaning schedule:
Add cleaning schedule, so the Robot can start cleaning automatically
at the time and date you set.
⑩ Accessories:
Check the usage status of the accessories: filter, side brush and main brush.
EN
Publicidad
Tabla de contenido
