Overload Protection - Flex MXE 900 Guía De Explotación

en
oPERAtING dIRECtIoNs
danGer!
Unplug the machine prior to any operations on the
machine.
Prior to initial starting:
Unpack the power tool and check the delivery
completeness and for eventual damage during
transport.
INsERtING oR REPlACEmENt tHE mIXING
AttACHmENt
▪ Pull the plug out of the socket.
▪ Unscrew the mixing attachment (9) by spanner
SW22 in anti-clockwise direction.
▪ Screw the mixing attachment (9) onto the ma-
chine in clockwise direction with spanner SW22.
swItCHING oN - swItCHING off
swItCHING oN:
▪ Press ON/OFF switch (4) and hold it in pressed
position.
swItCHING off:
▪ Release ON/OFF switch (4).
ElECtRoNIC RPm CoNtRol
All models are equipped with electronic switch
for rpm control. The speed of the mixing attach-
ment is controlled by the pressure on the switch
(4). Model MXE 1102 is equipped with two-speed
reduction gear. Switching between the speeds is
performed by rotating anti-clockwise the speed
selector switch (6) to 180° with the machine
stopped.
10
oPERAtING INstRUCtIoNs
mAINtENANCE
▪ The mixing attachment is still rotating for a
while after the machine has been switched off.
▪ If the rotating mixing attachment touches a sur-
face, this may provoke a rebound.
▪ The power tool shall be switched on after the
mixing attachment has already been dipped into
the mixture by smooth pressing the switch trigger
(4) until achieving maximum speed.

oVERloAd PRotECtIoN

▪ Upon major brief overloading, a current clutch
activates and switches the machine off until dis-
charging the load.
▪ Upon minor long overloading, the thermal over-
load protection activates and switches the motor
to a lower speed. The machine is disabled. To en-
able operation again, let the machine cool for ap-
proximately 3-5 min, and then switch the trigger
off and on again.
tECHNICAl sERVICING ANd mAINtENANCE
Unplug the machine prior to any operation on it.
ClEANING
▪ Clean the power tool and its ventilation slots (3)
regularly.
▪ Clean the body inner space with the motor with
compressed dry air on a regular basis.
caUtion!
danGer!