Temperature And Humidity - Bresser ClimateTemp NDH Manual De Instrucciones

TEMPERATURE AND HUMIDITY

The indoor temperature is always displayed in the
left bottom corner of the screen. To receive outdoor
temperature, you can connect up to 3 outdoor sensors
to the main unit.
Press the [ CHANNEL ] button to toggle between
Channel 1-3.
MAX/MIN MEMORY
To toggle between
maximum records for the selected sensor, press
[ MAX/MIN ] repeatedly. To clear records, press and
hold [ MAX/MIN ] in max/min interface.
NOTE: When the indoor temperature is lower than
-5 °C (23.0 °F), the screen displays LL.L. When the
temperature is higher than 50 °C (122.0 °F), the screen
displays HH.H.
TEMPERATURE AND HUMIDITY ALARM SETTING
1. Press and Hold [
Humidity alarm.
2. The setting parameter will flash.
current, minimum
] enter to set temperature and
3. Press [ ] or [
4. Press [ MODE ] button to confirm setting and enter
to next parameter.
5. Sequence of setting: Indoor upper temperature
limit  Indoor lower temperature limit  Indoor
upper humidity limit  Indoor lower humidity limit
 outdoor upper temperature limit  outdoor
lower temperature limit  outdoor upper humidity
limit  outdoor lower humidity limit
TEMPERATURE AND HUMIDITY ALARM OPERATION
and
1. Press [ ] to on/off temperature and Humidity
alarm.
2. When the measured temperature or humidity is
greater than the set upper limit or lower than the
set lower limit, the station will give an alarm.
ICE ALERT
If the channel 1 sensor falls between -2°C to 3°C
(28°F to 37°F), the ice alert indicator [
and will disappear once the temperature is out of this
range.
] button to set the desired data.
] will display,
DE
EN
IT
FR
ES
NL
27